Santoemma 2San 14B Janitors Cleaning Solution

This machine caters for the cleaning and sanitizing of vertical surfaces, sanitary fixtures, and hard floors, as well as stain removal and upholstery cleaning. No power cord allows the operator convenience of use. The battery charger is on board for an easy charging.

The cleaning process is carried out through four stages:

1. Spraying of a chemical solution on the surface/s
2. Chemical action against dirt and bacteria
3. Rinsing with clean water
4. Vacuuming of residual liquid from the floor

The spray gun allows for concentrated chemical solution application and for the rinsing of vertical surfaces, walls, and sanitary fixtures. The wand can be used to clean the hard floor with the injection-extraction system and a dedicated bristle, located on the vacuum head, provides effective brushing on very dirty hard floors.

Powerful vacuuming completely removes dirt from the floor and is collected in the recovery tank. When cleaning hard floors, it is possible to spray and vacuum simultaneously or to spray, brush, and then vacuum afterward. In both cases, hard floors are left perfectly dry in a few seconds and with minimal user effort.

This method represents a more effective way of cleaning than traditional methods using manual equipment as no residual soiling is left on the surfaces.

Advantages of the System

• Complete cleaning and sanitizing. The spraying of the chemical solution acts on the entire surface, including areas that are hard to reach when using manual tools. Laboratory tests certify that the Janitex 30 eliminates 99.9% of bacteria.
• Multi-functional. The machine can be used in a wide variety of environments and on several different surfaces including hard floors, sanitary fixtures, and upholstery.
• Increased hygienic safety for the operator, who does not come in touch with the surfaces and/or fixtures to be cleaned.
• Reduced labour for the operator. Manual work is reduced to a minimum, as the dirt is removed by the solution chemical working, in addition to the rinsing and vacuuming.
• Ease of use. Using the machine is very simple to use and operators require little training.
• Saving of time. Any environment can be completely cleaned, sanitized, and dried in less than one-third of the time required with manual tools.
• Saving of chemicals. The chemical is used without wastage because it is automatically dosed by the machine in an optimal quantity.
• Battery operated. The machine has no trailing wires and can operate freely in all environments.

Specifications:

Solution Tank Capacity: 14 litres
Recovery Tank Capacity: 14 litres
Vacuum Motor: 500W 2 Stage x 1 | 1300mm H2O | 45L/sec (max)
Pump: By pass type, membrane | 2.8 bar (40psi) (max) | 3L/min (max)
Water Consumption: 14L/50m2 (approx.)
Chemical Consumption: 200g/50m2 (approx.)
Batteries: 2 x 12V – 20Ah
Hose Assembly Length: 3 metres
Construction Material: High density polyethylene
Machine Weight: 41kg
Machine Size: 300 x 740 x 940mm
Run Time: 1.5 hours